Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2156 (Meter, Warning Lamp & Indicator) >> DTC/Circuit Diagnosis >> Fuel Level Sensor Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. COMBINATION METER INPUT SIGNAL
    1. Select "METER/M&A" on CONSULT-III.
    2. Using "FUEL METER" of "DATA MONITOR", compare the value of DATA MONITOR with fuel gauge pointer of combination meter.
      FUEL GAUGE POINTER OF COMBINATION METER

      Fuel gauge pointer Reference value of data monitor [lit.]
      Full Approx. 79.3
      3/4 Approx. 58.5
      1/2 Approx. 37.1
      1/4 Approx. 22.4
      Empty Approx. 7.6

      Does the data monitor value approximately match the fuel gauge indication? 

      YES: Inspection End.

      NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About Mike's Workshop Manuals