Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2092 (Seats) >> Automatic Drive Positioner >> Trouble Diagnosis >> Preliminary Check >> Setting Change Function

Setting Change Function

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

The settings of the automatic drive position system can be changed using CONSULT-III.

X: Applicable -: Not applicable

AUTOMATIC DRIVING POSITION SYSTEM SETTING CHANGE FUNCTION CHART

Setting item Content CONSULT-II (WORK SUPPORT) Display unit Default setting Factory setting
SEAT SLIDE
VOLUME SEAT		 The distance at retain operation can be selected from the following 3 modes. 40mm - X X
80mm - -
150mm - -
Sliding Driver Seat and Steering Wheel Raise When Entry/Exiting Vehicle The seat sliding and steering wheel raise exiting and entry at entry/exit can be selected: ON (operated)-OFF (not operated) ON ON: Indicator lamp ON - X
OFF OFF: Indicator lamp OFF X -
Reset custom settings(1) All settings to default. - Default: Setting button ON - -
(1) Setting of sliding driver seat and steering wheel raise for entry/exit of vehicle is ON at factory-shipment. But if custom settings are reset, setting turns OFF.
scientia non olet · About Mike's Workshop Manuals