Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2085 (Lighting System) >> Headlamp (For USA) >> CONSULT-III Function (BCM) >> Work Support >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "HEAD LAMP" on "SELECT TEST ITEM" screen.
  2. Touch "WORK SUPPORT" on "SELECT DIAG MODE" screen.
  3. Touch item on "SELECT WORK ITEM" screen.
  4. Touch "START".
  5. Touch "CHANGE SETT".
  6. The setting will be changed and "CUSTOMIZING COMPLETED" will be displayed.
  7. Touch "END".
scientia non olet · About Mike's Workshop Manuals