Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2064 (Continuously Variable Transmission (CVT)) >> DTC P0710 CVT Fluid Temperature Sensor Circuit >> Component Inspection >> CVT Fluid Temperature Sensor

CVT Fluid Temperature Sensor

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect CVT unit harness connector.
  3. Check resistance between CVT unit harness connector terminals.
    CVT FLUID TEMPERATURE SENSOR

    Name Connector Terminal Temperature °C (°F) Resistance (Approx.)
    CVT fluid temperature sensor F30 17 - 19 20 (68) 6.5 kΩ
    80 (176) 0.9 kΩ
    Fig 1: Checking Resistance Between CVT Unit Harness Connector Terminals
    G04916072Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace the transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About Mike's Workshop Manuals