Diagnostic Procedure
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SHIFT SOLENOID VALVE A CIRCUIT
Perform "Diagnostic Procedure" for DTC P0750. Refer to "DIAGNOSTIC PROCEDURE ".
OK or NG
OK: GO TO 2.
NG: Repair or replace damaged parts.
- CHECK MALFUNCTIONING ITEM
- Control valve assembly. Refer to "CONTROL VALVE ASSEMBLY ".
- Disassemble A/T. Refer to "DISASSEMBLY ".
- Check the following item:
- 2nd brake. Refer to "OIL PUMP, 2ND COAST BRAKE & 2ND BRAKE ".
- 2nd coast brake. Refer to "OIL PUMP, 2ND COAST BRAKE & 2ND BRAKE ", "ONE-WAY CLUTCH OUTER RACE SUB ASSEMBLY & 2ND COAST BRAKE HUB & ONE-WAY CLUTCH NO.1 ".
- One-way clutch No.1. Refer to "ONE-WAY CLUTCH OUTER RACE SUB ASSEMBLY & 2ND COAST BRAKE HUB & ONE-WAY CLUTCH NO.1 ".
- One-way clutch No.2. Refer to "DISASSEMBLY ".
OK or NG
OK: GO TO 3.
NG: Repair or replace damaged parts.
- CHECK DTC
Perform "DTC Confirmation Procedure". Refer to "DTC CONFIRMATION PROCEDURE ".
OK or NG
OK: INSPECTION END
NG: Replace control valve assembly. Refer to "CONTROL VALVE ASSEMBLY ".