Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1878 (Brake Control System) >> HDC/Has/VDC/TCS/Abs >> Trouble Diagnosis For Self-Diagnostic Items >> Steering Angle Sensor Safe Mode Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INDICATOR LAMP CHECK 

    Check that VDC OFF indicator lamp is on.

    OK or NG 

    OK: GO TO 2.

    NG: GO TO  3.

  2. ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION 

    Adjust steering angle sensor neutral position. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION ".

    OK or NG 

    OK: GO TO 3.

    NG: Check steering angle sensor. Refer to "STEERING ANGLE SENSOR SYSTEM ".

  3. INDICATOR LAMP CHECK B 

    Check that VDC OFF indicator lamp is off.

    OK or NG 

    OK: GO TO 4.

    NG: Perform basic inspection. Refer to "BASIC INSPECTION ".

  4. CHECK SELF-DIAGNOSTIC RESULTS 

    Perform ABS actuator and electric unit (control unit) self-diagnosis.

    Self-diagnosis results

    ST ANGL SEN SAFE

    NOTE: When self-diagnostic results show items other than those above, perform repair or replacement for the item indicated and repeat self-diagnosis.

    Is the above displayed on self-diagnosis display? 

    YES: Erase error memory.

    NO: Inspection End.

scientia non olet · About Mike's Workshop Manuals