Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1852 (Engine Mechanical) >> Cylinder Block >> How to Select Piston and Bearing >> How To Select Piston >> Piston Selection Table

Piston Selection Table

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
PISTON SELECTION

Grade 1 2 (or no mark) 3
Cylinder bore inner diameter 95.500 - 95.510
(3.7598 - 3.7602)		 95.510 - 95.520
(3.7602 - 3.7606)		 95.520 - 95.530
(3.7606 - 3.7610)
Piston skirt diameter 95.480 - 95.490
(3.7590 - 3.7594)		 95.490 - 95.500
(3.7594 - 3.7598)		 95.500 - 95.510
(3.7598 - 3.7602)
NOTE:
  • Piston is available together with piston pin as assembly.
  • Piston pin (piston pin hole) grade is provided only for the parts installed at the plant. For service parts, no piston pin grades can be selected. (Only "0" grade is available.)
  • No second grade mark is available on piston.
scientia non olet · About Mike's Workshop Manuals