Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1799 (Body, Lock & Security System) >> Slide Door Lock >> Removal and Installation >> Sliding Door Lock Assembly

Sliding Door Lock Assembly

WARNING: This page is about a different car, the 2006 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sliding Door Lock Assembly With Torque Specifications
G04199507Courtesy of NISSAN MOTOR CO., U.S.A.
  1. Remove sliding door finisher. Refer to "SLIDING DOOR ".
  2. Remove exterior door handle. Refer to "OUTSIDE HANDLE ".
  3. Disconnect sliding door lock assembly electrical connectors.
  4. Remove sliding door lock assembly.
    • Remove screws from front and rear latches.

    Installation is in the reverse order of removal.

scientia non olet · About Mike's Workshop Manuals