Combination Meter Buzzer Circuit Inspection

WARNING: This page is about a different car, the 2006 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK OPERATION OF COMBINATION METER BUZZER
1. Select "BUZZER" of "BCM" on CONSULT-II.
2. Perform "LIGHT WARN ALM", "IGN KEY WARN ALM" or "SEAT BELT WARN TEST" of "ACTIVE TEST".
Does chime sound?
1. YES: INSPECTION END
2. NO: GO TO 2.
  
  Fig 1: CONSULT-II Screen Display - Active Test
  Courtesy of NISSAN MOTOR CO., U.S.A.
CHECK BCM (CONSULT-II)
Perform self-diagnosis of BCM. Refer to "CONSULT-II FUNCTION (BCM) ".

Self-diagnosis results

No malfunction detected: GO TO 3.

Malfunction detected: Check applicable parts, and repair or replace corresponding parts.
CHECK BATTERY POWER SUPPLY CIRCUIT OF COMBINATION METER
Check battery power supply circuit of combination meter. Refer to "POWER SUPPLY AND GROUND CIRCUIT INSPECTION ".

OK or NG
1. OK: Replace combination meter.
2. NG: Check harness between combination meter and fuse.