Piston Selection Table
WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
PISTON SELECTION
| Unit: mm (in) | |||
|---|---|---|---|
| Grade number (Mark) | 1 | 2 | 3 |
| Cylinder bore diameter | 98.000-98.010 (3.8583-3.8587) | 98.010-98.020 (3.8587-3.8590) | 93.020-98.030 (3.8590-3.8594) |
| Piston diameter | 97.980-97.990 (3.8575-3.8579) | 97.990-98.000 (3.8579-3.8583) | 98.000-98.010 (3.8583-3.8587) |
CAUTION:
Oversize must be used in all cylinders when using oversized parts.
Piston oversize (Service): 0.20 mm (0.0079 in)
NOTE:
- The piston is available together with piston pin as an assembly.
- The piston pin (piston pin bore) grade is provided only for the parts installed at the plant. For service parts, no grades can be selected (Only 0 grade is available.).
- Hone cylinder to obtain specified clearance between piston and cylinder bore when using an oversized piston. Be sure to use the same oversized piston rings.