Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1520 (Rear Final Drive) >> M226 With Electronic Locking Differential >> Trouble Diagnosis For System >> Power Supply Circuit For Differential Lock Control Unit >> Differential Lock Control Unit Terminals And Reference Value

Differential Lock Control Unit Terminals And Reference Value

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Data are reference value and are measured between each terminal and ground.

CONNECTOR TERMINAL SPECIFICATION

Terminal Wire color Item Condition Data (Approx.)
1 W/G Power supply Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
2 W/G Power supply Ignition switch: ON Battery voltage
Ignition switch: OFF 0V
3 B Ground Always 0V
10 B Ground Always 0V
15 R/Y Power supply (Memory back-up) Ignition switch: ON Battery voltage
Ignition switch: OFF Battery voltage
CAUTION: When using a circuit tester to measure voltage for inspection, be sure not to extend forcibly any connector terminals.
scientia non olet · About Mike's Workshop Manuals