Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1481 (Engine Control System) >> DTC P0605: ECM >> Diagnostic Trouble Codes Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2005 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: CONSULT-II Data Monitor Display
    G02474222Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and wait at least 1 second.
  4. Repeat step 2 to 3 for 32 times
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
scientia non olet · About Mike's Workshop Manuals