Turn Signal Operation: Notes

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

When the ignition switch is in ON or START position, power is supplied

Through 10A fuse [No. 1, located in fuse block (J/B)]
To BCM (body control module) terminal 38,
Through 10A fuse [No. 12, located in fuse block (J/B)]
To unified meter and A/C amp. terminal 22,
Through 10A fuse [No. 14, located in fuse block (J/B)]
To combination meter terminal 23.

Ground is supplied

To BCM terminal 52
Through grounds M30 and M66,
To unified meter and A/C amp. terminals 29 and 30
Through grounds M30 and M66,
To combination meter terminals 10, 11 and 12
Through grounds M30 and M66.