Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1436 (Automatic Transmission) >> DTC P1710: A/T Fluid Temperature Sensor Circuit >> Component Inspection >> A/T Fluid Temperature Sensor 2

A/T Fluid Temperature Sensor 2

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove A/T fluid temperature sensor 2. Refer to "A/T FLUID TEMPERATURE SENSOR 2 REMOVAL AND INSTALLATION ".
  2. Check resistance between terminals.
    Fig 1: Resistance Between A/T Fluid Temperature Sensor 2 Terminal F507 Connectors 1, 2 Specification Table
    G02408167Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Resistance Between A/T Fluid Temperature Sensor 2 Terminal F507 Connectors 1, 2
    G02408168Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, replace A/T fluid temperature sensor 2. Refer to "A/T FLUID TEMPERATURE SENSOR 2 REMOVAL AND INSTALLATION ".
scientia non olet · About Mike's Workshop Manuals