Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1436 (Automatic Transmission) >> DTC P1710: A/T Fluid Temperature Sensor Circuit >> Component Inspection >> A/T Fluid Temperature Sensor 1

A/T Fluid Temperature Sensor 1

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove control valve with TCM. Refer to "CONTROL VALVE WITH TCM AND A/T FLUID TEMPERATURE SENSOR 2 ".
  2. Check resistance between terminals.
    Fig 1: A/T Fluid Temperature Sensor 1 Connector F505 Terminals 6, 7 Resistance Specifications Table
    G02408165Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: A/T Fluid Temperature Sensor 1 Connector F505 Terminals 6, 7 Resistance Specifications Table
    G02408166Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, replace control valve with TCM. Refer to "CONTROL VALVE WITH TCM AND A/T FLUID TEMPERATURE SENSOR 2 ".