Turn Signal Operation: Notes

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Power is supplied at all times

Through 10A fuse [No. 20, located in fuse block (J/B)]
To rear combination lamp control unit terminal 1.

When ignition switch is in ON or START position, power is supplied

Through 15A fuse [No. 1, located in fuse block (J/B)]
To BCM (body control module) terminal 38,
Through 10A fuse [No. 14, located in fuse block (J/B)]
To combination meter terminal 7.

When ignition switch is in ACC or ON position, power is supplied

Through 10A fuse [No. 6, located in fuse block (J/B)]
To BCM terminal 11.

Ground is supplied

To BCM terminals 49 and 52
Through grounds M35, M45 and M85,
To rear combination lamp control unit terminal 7
Through grounds E21, E50 and E51,
To combination meter terminals 5, 6 and 15
Through grounds M35, M45 and M85.