Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1155 (Unified Meter And A/C Amp) >> Unified Meter And A/C Amp >> CONSULT-II Function >> Data Monitor >> Display Item List

Display Item List

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
DISPLAY ITEM LIST

Display item [Unit] MAIN SIGNALS CAN DIAG SUPPORT MNTR SELECTION FROM MENU Contents
SPEED METER [km/h] or [mph] X   X This is the angle correction value after the speed signal from the ABS actuator and electric unit (control unit) is converted into the vehicle speed.
SPEED OUTPUT [km/h] or [mph] X   X This is the angle correction value before the speed signal from the ABS actuator and electric unit (control unit) is converted into the vehicle speed.
TACHO METER [RPM] X   X This is the converted value for the engine speed signal from the ECM.
W TEMP METER [°C] or [°F] X   X This is the converted value for the engine coolant temperature signal from the ECM.
FUEL METER [lit.] X   X This is the processed value for the signal (resistance value) from the fuel gauge.
DISTANCE [km] or [mile] X   X This is the calculated value for the speed signal from the ABS actuator and electric unit (control unit), the signal (resistance signal) from the fuel gauge and fuel consumption from ECM.
FUEL W/L [ON/OFF] X   X Indicates [ON/OFF] condition of low-fuel warning lamp.
MIL [ON/OFF]     X Indicates [ON/OFF] condition of malfunction indicator lamp.
AIR PRES W/L [ON/OFF]     X Indicates [ON/OFF] condition of low tire pressure warning lamp.
SEAT BELT W/L [ON/OFF]     X Indicates [ON/OFF] condition of seat belt warning lamp.
BUZZER [ON/OFF] X   X Indicates [ON/OFF] condition of buzzer.
DOOR W/L [ON/OFF]     X Indicates [ON/OFF] condition of door warning lamp.
HI-BEAM IND [ON/OFF]     X indicates [ON/OFF] condition of high beam indicator.
TURN IND [ON/OFF]     X Indicates [ON/OFF] condition of turn indicator.
OIL W/L [ON/OFF]     X Indicates [ON/OFF] condition of oil pressure warning lamp.
VDC IND [ON/OFF]     X Indicates [ON/OFF] condition of VDC OFF indicator lamp.
ABS W/L [ON/OFF]     X Indicates [ON/OFF] condition of ABS warning lamp.
SLIP IND [ON/OFF]     X Indicates [ON/OFF] condition of SLIP indicator lamp.
BRAKE W/L [ON/OFF]     X Indicates [ON/OFF] condition of brake warning lamp. (1)
M RANGE SW [ON/OFF] (2) X   X Indicates [ON/OFF] condition of manual mode range switch.
NM RANGE SW [ON/OFF] (2) X   X Indicates [ON/OFF] condition of except for manual mode range switch.
AT SFT UP SW [ON/OFF] (2) X   X Indicates [ON/OFF] condition of CVT shift-up switch.
AT SFT DWN SW [ON/OFF] (2) X   X Indicates [ON/OFF] condition of CVT shift-down switch.
O/D OFF SW [ON/OFF]     X Indicates [ON/OFF] condition of CVT device (second position switch).
BRAKE SW [ON/OFF]     X Indicates [ON/OFF] condition of brake switch (stop lamp switch).
AT-M IND [ON/OFF] (2) X   X Indicates [ON/OFF] condition of CVT manual mode indicator.
AT-M GEAR [5-1] (3) X   X Indicates [5-1] condition of CVT manual mode gear position.
P RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift P range indicator.
R RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift R range indicator.
N RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift N range indicator.
D RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift D range indicator.
L RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift L range indicator.
CVT IND [ON/OFF]     X Indicates [ON/OFF] condition of CVT indicator.
S RANGE IND [ON/OFF] X   X Indicates [ON/OFF] condition of CVT shift S range indicator.
CRUISE IND [ON/OFF]     X Indicates [ON/OFF] condition of CRUISE indicator.
SET IND [ON/OFF]     X Indicates [ON/OFF] condition of SET indicator.
4WD LOCK SW [ON/OFF]     X Indicates [ON/OFF] condition of AWD lock switch.
4WD LOCK IND [ON/OFF]     X Indicates [ON/OFF] condition of AWD lock indicator lamp.
4WD W/L [ON/OFF]     X Indicates [ON/OFF] condition of AWD warning lamp.
CAN CIRC 1 [OK/UNKWN]   X   Displays [OK/UNKWN] condition of the CAN communication judged by each signal input.
CAN CIRC 2 [OK/UNKWN]   X  
CAN CIRC 3 [OK/UNKWN]   X  
CAN CIRC 4 [OK/UNKWN]   X  
CAN CIRC 5 [OK/UNKWN]   X  
CAN CIRC 6 [OK/UNKWN]   X  
CAN CIRC 7 [OK/UNKWN]   X  
CAN CIRC 8 [OK/UNKWN]   X  
CAN CIRC 9 [OK/UNKWN]   X  
CAN CIRC 10 [OK/UNKWN]   X  
CAN CIRC 11 [OK/UNKWN]   X  
CAN CIRC 12 [OK/UNKWN]   X  
CAN CIRC 13 [OK/UNKWN]   X  
CAN CIRC 14 [OK/UNKWN]   X  
CAN 1 STAT [0-40] (4)   X   Displays condition of the CAN communication judged by each signal input.
CAN 2 STAT [0-40]   X  
CAN 3 STAT [0-40]   X  
CAN 4 STAT [0-40]   X  
CAN 5 STAT [0-40]   X  
CAN 6 STAT [0-40]   X  
CAN 7 STAT [0-40]   X  
CAN 8 STAT [0-40]   X  
CAN 9 STAT [0-40]   X  
CAN 10 STAT [0-40]   X  
CAN 11 STAT [0-40]   X  
CAN 12 STAT [0-40]   X  
CAN 13 STAT [0-40]   X  
CAN 14 STAT [0-40]   X  
(1) Monitor keeps indicating "OFF" when brake warning lamp is on by the parking brake operation or low brake fluid level.
(2) Vehicles without manual mode always indicates "OFF".
(3) Vehicles without manual mode always indicates "1".
(4) CAN status indicates the condition of the CAN communication judged by each signal input.
NOTE: Any monitored item that does not match the vehicle being diagnosed is deleted from the display automatically.
  • Normal: If any problems were not found in the past, CAN status indicates "0". In case of operating properly at the present in spite of having incident in the past, then CAN status indicates "39-1".
  • Malfunction: If there is a malfunction, CAN indicates "40".

After returning to normal condition, every time ignition switch is turned OFF from ON, the indication will change like "39"-->"38"-->"37"..."1". And if a malfunction is detected again, CAN status indicates "40". (Though returning to the normal condition, "0" is not indicated. To reset, select and press the "ERASE" on the "SELF-DIAGNOSIS" screen.)

scientia non olet · About Mike's Workshop Manuals