Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Continuously Variable Transmission (CVT)) >> DTC P0826 Manual Mode Switch Circuit >> Position Indicator Lamp >> Diagnostic Procedure >> Notes

Diagnostic Procedure: Notes

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INPUT SIGNALS 

    WITH CONSULT-II 

    1. Start engine.
    2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-II and read out the value of "M GEAR POS".
    3. Drive vehicle in the manual mode, and confirm that the actual gear position and the meter's indication of the position mutually coincide when the select lever is shifted to the "+ (up)" or "- (down)" side (1st <==> 6th gear).

    OK or NG 

    1. OK: INSPECTION END 
    2. NG: Check the following.
scientia non olet · About Mike's Workshop Manuals