Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Continuously Variable Transmission (CVT)) >> DTC P0710 CVT Fluid Temperature Sensor Circuit >> Component Inspection >> CVT Fluid Temperature Sensor

CVT Fluid Temperature Sensor

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect CVT unit harness connector.
  3. Check resistance between CVT unit harness connector terminals 17 and 19.
    Fig 1: Terminals Resistance Reference Chart
    G00769468Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Checking Resistance Between CVT Unit Harness Connector Terminals 17 And 19
    G00769469Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace transaxle assembly. Refer to "REMOVAL AND INSTALLATION ".
scientia non olet · About Mike's Workshop Manuals