Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Sentra SE-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 1085 (Automatic HVAC System) >> Trouble Diagnosis >> Consult-II >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "AIR CONDITIONER" on "SELECT TEST ITEM" screen.
    Fig 1: Displaying Select Test Item
    G00867314Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "DATA MONITOR" on "SELECT DIAG MODE" screen.
    Fig 2: Displaying Select Diag Mode
    G00867315Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch either "ALL SIGNALS" or "SELECTION FROM MENU" on "DATA MONITOR" screen.
    Fig 3: Displaying Data Monitor
    G00867317Courtesy of NISSAN MOTOR CO., U.S.A.
    ITEMS MONITORS

    All signals Monitors all the items.
    Selection from menu Selects and monitors the individual item selected.
  4. Touch "START".
  5. When "SELECTION FROM MENU" is selected, touch items to be monitored. When "ALL SIGNALS" is selected, all the items will be monitored.
  6. Touch "RECORD" while monitoring, then the status of the monitored item can be recorded. To stop recording, touch "STOP".
scientia non olet · About Mike's Workshop Manuals