Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Quest SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0335: CKP Sensor (Pos) >> Component Inspection >> Crankshaft Position Sensor (POS)

Crankshaft Position Sensor (POS)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect crankshaft position sensor (POS) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Crankshaft Position Sensor (POS)
    G00775697Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in Fig 2 .
    Fig 2: Terminals And Resistance Specification Chart
    G00775698Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Checking Resistance
    G00775699Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals