Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P1121: Electric Throttle Control Actuator >> DTC Confirmation Procedure >> Procedure For Malfunction A And B >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Shift selector lever to D position and wait at least 3 seconds.
  4. Shift selector lever to P or N position.
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Turn ignition switch ON and wait at least 1 second.
  7. Shift selector lever to D position and wait at least 3 seconds.
  8. Shift selector lever to P of N position.
  9. Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
  10. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals