Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0335: CKP Sensor (Pos) >> Component Inspection >> Crankshaft Position Sensor (Pos)

Crankshaft Position Sensor (Pos)

  1. Loosen the fixing bolt of the sensor.
  2. Disconnect crankshaft position sensor (POS) harness connector.
  3. Remove the sensor.
  4. Visually check the sensor for chipping.
    Fig 1: Checking Crankshaft Position Sensor For Chipping
    G00782455Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Check resistance as shown in the figure.
    Fig 2: Checking Crankshaft Position Sensor Terminal Resistance
    G00782456Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 3: Crankshaft Position Sensor Terminals Resistance Specifications
    G00782457Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals