Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Maxima SL, RE4F04B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Introduction >> Power Supply Circuit For ECM >> Diagnostic Procedure >> 2) Check ECM Power Supply Circuit-I

2) Check ECM Power Supply Circuit-I

  1. Turn ignition switch OFF and then ON.
  2. Check voltage between ECM terminal 109 and ground with CONSULT-II or tester.
    1. Voltage: Battery voltage 

OK or NG 

  1. OK: GO TO 4 .
  2. NG: GO TO 3.
Fig 1: Check ECM Power Supply Circuit-I
G00875838Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals