8. Check Cooling Fan Motor-2 Circuit-II

1. Check harness continuity between the following terminals.

   Cooling fan motor-2 terminal 1 and IPDM E/R terminal 13

   Cooling fan motor-2 terminal and IPDM E/R terminals 10, 14 Refer to WIRING DIAGRAM.

   1. Continuity should exist. 
2. Also check harness for short to ground and short to power.

OK or NG 

1. OK: GO TO 9.
2. NG: Repair open circuit or short to ground or short to power in harness or connectors.