Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Maxima SL, RE4F04B >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC >> DTC P1121: Electric Throttle Control Actuator >> DTC Confirmation Procedure >> Procedure For Malfunction C >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Shift selector lever to D position (A/T models) or 1st position (M/T models) and wait at least 2 seconds.
  4. Shift selector lever to N, P position (A/T models) or Neutral position (M/T models).
  5. Start engine and let it idle for 3 seconds.
  6. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals