Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Frontier Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - KA24DE >> DTC P0405, P0406: EGRT Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00854605Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Verify that engine coolant temperature is less than 50°C (122°F).

    If the engine coolant temperature is above the range, cool the engine down. 

  4. Start engine and let it idle for at least 8 seconds.
  5. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals