Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2004 >> Frontier Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - KA24DE >> DTC P0327, P0328: KS >> DTC Confirmation Procedure >> Testing Condition: >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00854523Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine and run it for at least 5 seconds at idle speed.
  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals