2. Check Vehicle Speed Input

1. Apply wheel chocks and jack up drive wheel.
2. Disconnect ASCD control unit harness connector.
3. Check voltage between control unit connector M119 terminal 22 (G/B) and ground while turning drive wheel slowly by hand.
   Fig 1: Checking Vehicle Speed Input

   Courtesy of NISSAN MOTOR CO., U.S.A.

Yes or No? 

1. Yes: Vehicle speed sensor is OK.
2. No: Check harness for open or short between ASCD control unit connector M119 terminal 22 (G/B) and combination meter connector M39 terminal 37 (G/B).