4. Check Power Window Serial Link Circuit

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect BCM.
Check continuity between BCM connector M18 terminal 22 and main power window and door lock/unlock switch connector D7 terminal 14.
1. 22 (G) - 14 (LG/W): Continuity should exist
Fig 1: Checking Continuity
Courtesy of NISSAN MOTOR CO., U.S.A.
Check continuity between BCM connector M18 terminal 22 and power window and door lock/unlock switch RH connector D105 terminal 16.
1. 22 (G) - 16 (LG/W): Continuity should exist

OK or NG

OK >> Replace main power window and door lock/unlock switch or power window and door lock/unlock switch RH
NG >> Repair or replace harness.

Fig 2: Checking Continuity

Courtesy of NISSAN MOTOR CO., U.S.A.