Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (2004 - Engine Control System - Coupe) >> Trouble Diagnosis >> Basic Inspection >> 10. Check Ignition Timing

10. Check Ignition Timing

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Run engine at idle.
  2. Check ignition timing with a timing light. See Figure.
    1. A/T: 15 +/- 5° BTDC (in P or N position) 
    2. M/T: 15 +/- 5° BTDC (in neutral position) 

OK or NG 

OK: INSPECTION END 

NG: GO TO 11.