Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2401 (Engine Control System - DTCS P0605 To P2A03) >> DTC P1217: Engine Over Temperature >> Overall Function Check >> With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the coolant level in the reservoir tank and radiator.

    Allow engine to cool before checking coolant level. 

    If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to "DIAGNOSIS PROCEDURE ".

  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to "DIAGNOSIS PROCEDURE ".
  3. Turn ignition switch ON.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-III.
  5. If the results are NG, go to "DIAGNOSIS PROCEDURE ".
    Fig 1: Identifying Coolant Level In Reservoir Tank
    G07152693Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals