Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2386 (2004.5 - Engine Control System - Component Testing - Coupe) >> Ignition Signal >> Component Inspection >> Ignition Coil With Power Transistor

Ignition Coil With Power Transistor

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ignition coil harness connector.
  3. Check resistance between ignition coil terminals as follows.
    Fig 1: Checking Resistance Between Ignition Coil Terminals As Follows
    G03696665Courtesy of NISSAN MOTOR CO., U.S.A.
    TERMINAL NO SPECIFICATION

    Terminal No. (Polarity) Resistance Ω [at 25°C (77°F)]
    1 and 2 Except 0 or "INFINITY"
    1 and 3 Except 0
    2 and 3
scientia non olet · About Mike's Workshop Manuals