Stop Lamps Do Not Turn On Though HDC Functions

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

INSPECTION OF STOP LAMP RELAY

Turn ignition switch OFF.
Disconnect stop lamp relay connector E12.

Check continuity between stop lamp relay terminals 3 and 5.

CONTINUITY SPECIFICATIONS

Condition	Continuity
12V direct current supply between terminals 1 and 2	Yes
No current supply	No

OK or NG

OK: Repair the stop lamp circuit.
NG: Replace stop lamp relay.

Fig 1: Inspecting Stop Lamp Relay
Courtesy of NISSAN MOTOR CO., U.S.A.