Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1534 (Brake Control System) >> Brake Control System - ABLS/Abs >> Trouble Diagnosis >> Basic Inspection >> Abs Warning Lamp And Slip Indicator Lamp Inspection

Abs Warning Lamp And Slip Indicator Lamp Inspection

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure ABS warning lamp and SLIP indicator lamp turn on for approximately 2 seconds when the ignition switch is turned ON. If they do not, check CAN communications. If there are no errors with CAN communication system, check combination meter. Refer to "COMBINATION METERS ".
  2. Make sure the lamps turn off approximately 2 seconds after the ignition switch is turned ON. If the lamps do not turn off, conduct self-diagnosis.
  3. Make sure ABS warning lamp turns off approximately 2 seconds after the engine is started. If ABS warning lamp has not turned off 10 seconds after the engine has been started, conduct self-diagnosis of the ABS actuator and electric unit (control unit).
  4. After conducting the self-diagnosis, be sure to erase the error memory. Refer to "CONSULT-II Function (ABS) ".
scientia non olet · About Mike's Workshop Manuals