Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1415 (Engine Control System - VQ35DE) >> DTC P1124, P1126: Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P1126 >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR"" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE  ".
    Fig 1: Data Monitor Scan Tool Display
    G02360724Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals