Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1165 (Engine Control System - Qr25DE) >> DTC P1572: ASCD Brake Switch >> Component Inspection >> ASCD Clutch Switch (For M/T Models)

ASCD Clutch Switch (For M/T Models)

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ASCD clutch switch harness connector.
  3. Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

    If NG, adjust ASCD clutch switch installation, refer to "CLUTCH SYSTEM ", and perform step 3 again.

    Fig 1: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 & 2
    G00778867Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Continuity Table
    G00778866Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals