Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1164 (Engine Control System - QG18DE) >> DTC P1124, P1126: Throttle Control Motor Relay >> DTC Confirmation Procedure >> Procedure For DTC P1126

Procedure For DTC P1126

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II 

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, go to DIAGNOSTIC PROCEDURE .
    Fig 1: Displaying DATA MONITOR Mode (2 Of 2)
    G00773807Courtesy of NISSAN MOTOR CO., U.S.A.

With GST 

Follow the procedure "With CONSULT-II" above.

scientia non olet · About Mike's Workshop Manuals