Power Supply & Ground Circuit
Power is supplied at all times from 30-amp fusible link letter "D", located in the fuse and fusible link box, to circuit breaker, to power window relay terminal No. 5.
With ignition switch in "ON" or "START" position, power is supplied through 10-amp fuse No. 10, located in the fuse block (J/B), to power window relay terminal No. 1.
Ground is supplied to power window relay terminal No. 2, through body grounds M28 (located behind left side of instrument panel) and M54 (located behind right side of instrument panel). See Figure and Figure . The power window relay is energized and power is supplied through power window relay terminal No. 3, to main power window and door lock/unlock switch terminal No. 1, to right front power window switch terminal No. 5, to left and right rear power window switch terminal No. 5.