Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Re4F04B) >> Trouble Diagnosis For DTC >> DTC Control Unit (Ram), Control Unit (ROM) >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode for A/T with CONSULT-II.
  2. Start engine.
    Fig 1: DTC Confirmation Procedure With CONSULT -II (1 Of 2)
    G01320313Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Run engine for at least 2 seconds at idle speed.
Fig 2: DTC Confirmation Procedure With CONSULT -II (2 Of 2)
G01320314Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals