Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (2004 - Engine Control System - Coupe) >> DTC P0102, P0103: MAF Sensor >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> Procedure For DTC P0103

Procedure For DTC P0103

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II 

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II. See Figure.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to "Diagnostic Procedure ".

    If DTC is not detected, go to next step.

  5. Start engine and wait at least 5 seconds.
  6. If DTC is detected, go to "Diagnostic Procedure ".

With GST 

Follow the procedure "With CONSULT-II" above.

scientia non olet · About Mike's Workshop Manuals