Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2375 (Engine Control System - Introduction) >> Basic Service Procedure >> Ethanol Mixture Ratio Adaptation (Flexible Fuel Vehicle) >> Operation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "ETHANOL M/R ADJ" in "WORK SUPPORT" mode with CONSULT-II, then touch "START".
    Fig 1: CONSULT-II Screen Display - Ethanol M/R ADJ
    G04184958Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Select "E35" and then touch "UPDATE".
    Fig 2: CONSULT-II Screen Display - Ethanol M/R ADJ
    G04184959Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Crank engine and make sure that engine starts.

    If NG, go to next step.

  5. Select "E70" and then touch "UPDATE".
    Fig 3: CONSULT-II Screen Display - Ethanol M/R ADJ
    G04184960Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Crank engine and make sure that engine starts.
scientia non olet · About Mike's Workshop Manuals