Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1534 (Brake Control System) >> Brake Control System - Abs >> Actuator And Electric Unit (Assembly) >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: To install, use a flare nut wrench (commercial service tool).
  • Always tighten brake tubes to specification when installing. Refer to " BRAKE PIPING AND HOSE  ". 
  • Never reuse drained brake fluid. 
  • After installation of the ABS actuator and electric unit (control unit), refill brake system with new brake fluid. Then bleed the air from the system. Refer to " BLEEDING BRAKE SYSTEM  ". 
scientia non olet · About Mike's Workshop Manuals