Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1174 (Automatic Transaxle - Re4F03B) >> DTC Batt/Fluid Temp Sen (A/T Fluid Temp Sensor Circuit And TCM Power Source) >> DTC Control Unit (Ram), Control Unit (ROM) >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECTION START (WITH CONSULT-II) 

    With CONSULT-II 

    1. Turn ignition switch "ON" and select "SELF DIAGNOSIS" mode for A/T with CONSULT-II.
    2. Touch "ERASE".
      1. GO TO 2.
  2. CHECK DTC 

    Perform "DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE ".

    1. GO TO 3.
  3. CHECK DTC AGAIN 

    Is the "CONTROL UNIT (RAM)" or "CONTROL UNIT (ROM)" displayed again?

    Yes or No 

    1. Yes: Replace TCM.
    2. No: INSPECTION END 
scientia non olet · About Mike's Workshop Manuals