ASCD Clutch Switch (For M/T Models)

WARNING: This page is about a different car, the 2004 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch OFF.
Disconnect ASCD clutch switch harness connector.
Check harness continuity between ASCD clutch switch terminals 1 and 2 under the following conditions.

Fig 1: ASCD Clutch Switch Terminals Continuity Conditions Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

If NG, adjust ASCD clutch switch installation, refer to CLUTCH PEDAL INSPECTION AND ADJUSTMENT and perform step 3 again.

Fig 2: Checking Harness Continuity Between ASCD Clutch Switch Terminals 1 And 2

Courtesy of NISSAN MOTOR CO., U.S.A.