Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Maxima GLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0128: Thermostat Function >> DTC Confirmation Test

DTC Confirmation Test

  1. Replace thermostat with an OEM replacement. If an incorrect thermostat is used, the MIL may coma on. Turn ignition on. Select COOLAN TEMP/S in DATA MONITOR mode with scan tool. If COOLAN TEMP/S is less than 140°F (60°C), go to next step. If COOLAN TEMP/S is above than 140°F (60°C), allow engine to cool and repeat step.
  2. Drive vehicle at a speed of 50-75 MPH for 10 consecutive minutes. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.
scientia non olet · About Mike's Workshop Manuals