Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Engine Control System - VG33E) >> DTC P1706: PNP Switch >> Overall Function Check

Overall Function Check

WARNING: This page is about a different car, the 2004 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Use this procedure to check the overall function of the park/neutral position (PNP) switch circuit. During this check, a 1st trip DTC might not be confirmed.

WITH GST 

  1. Turn ignition switch ON.
  2. Check voltage between ECM terminal 22 and body ground under the following conditions.
    Fig 1: Checking Voltage Between ECM Terminal 22 And Body Ground
    G00742352Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: Reference Data
    G00742351Courtesy of NISSAN MOTOR CO., U.S.A.
  3. If NG, go to "DIAGNOSTIC PROCEDURE ".