Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Engine Control System - KA24DE) >> ECM Terminals and Reference Value >> ECM Inspection Table

ECM Inspection Table

WARNING: This page is about a different car, the 2004 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECM's transistor. Use a ground other than ECM terminals, such as the ground.
Fig 1: ECM Inspection Table (1 Of 7)
G00856899Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: ECM Inspection Table (2 Of 7)
G00856900Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: ECM Inspection Table (3 Of 7)
G00856901Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: ECM Inspection Table (4 Of 7)
G00856902Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: ECM Inspection Table (5 Of 7)
G00856903Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 6: ECM Inspection Table (6 Of 7)
G00856904Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 7: ECM Inspection Table (7 Of 7)
G00856905Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals