Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Engine Control System - KA24DE) >> DTC P0456: EVAP Control System >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

WARNING: This page is about a different car, the 2004 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC P0456 or P1456 is displayed with P0442, first perform trouble diagnosis for DTC P0456 or P1456.
  • Make sure that EVAP hoses are connected to EVAP canister purge volume control solenoid valve properly.
  • After repair, make sure that the hoses and clips are installed properly.
  • If "DTC Confirmation Procedure" has been previously conducted, always turn ignition switch OFF and wait at least 5 seconds before conducting the next test.
scientia non olet · About Mike's Workshop Manuals