Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Engine Control System - KA24DE) >> DTC P0340: CMP Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00854543Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Crank engine for at least 2 seconds.
  4. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About Mike's Workshop Manuals